— Whoever, being required by or under this Act or the rules made thereunder to submit returns, maintain any record or register, or being required by the Director or the Controller or any legal metrology officer to produce before him for inspection any weight or measure or any document, register or other record relating thereto, omits or fails without any reasonable excuse, so to do, shall be punished with fine which may extend to five thousand rupees and for the second or subsequent offence, with imprisonment for a term which may extend to one year and also with fine. Preliminary. SECTION 37. —, SECTION 10. Power of inspection, seizure, etc. —, SECTION 52. They had imported the same for their self-use and, therefore, cannot be compelled to seek registration as an importer under Section 19 of the Act. SECTION 6. (b) from every decision or order made by the Director of Legal Metrology under sections 15 to 20, section 22, section 25, sections 27 to 39, section 41 or any rule made under sub-section (3) of section 52, to the Central Government or any officer specially authorised in this behalf by that Government; Reference, secondary and working standard. Penalty for repair, sale, etc., of weight and measure without licence. —, SECTION 33. —, SECTION 23. Repeal of the Standards of Weights and Measures Act, 1976 and Standards of Weights and Measures (Enforcement) Act, 1985. (3) It shall come into force on such as the Central Government may, by notification in the Official Gazette, appoint and different dates may be appointed for different provisions of this Act. Prohibition on manufacture, repair or sale of weight or measure without licence. No person shall manufacture, import, deal, or repair any weight or measure device without a valid license obtained from the. Rule 15 of the Legal Metrology (General) Rules, 2011 defines the registration as an importer of weighing and measuring devices. Prohibition of quotation, etc., otherwise than in terms of standard units of weight, measure or numeration. SECTION 39. (2) Any numeral which conforms to the provisions of section 6 shall be the standard numeral. Penalty for obstructing Director, Controller or legal metrology officer. Each state has different application fees and different timelines for approvals of the license, whereas the validity for a license is from. Non Suspension of Beam Scale in trade premises. — Whoever, sells, distributes, delivers or otherwise transfers or uses any unverified weight or measure shall be punished with fine which shall not be less than two thousand rupees but which may extend to ten thousand rupees and, for the second or subsequent offence, with imprisonment for a term which may extend to one year and also with fine. — The Director, the Controller or any legal metrology officer, exercising powers under this Act or any rule made thereunder, who knows that there are no reasonable grounds for so doing, and yet—, (a) searches, or causes to be searched, any house, conveyance or place; or. Section 19 in The Legal Metrology Act, 2009. (4) Every legal metrology officer appointed under sub-section (1) shall exercise and discharge the duties under the general superintendence, direction and control of the Controller. Any custom, usage, etc., contrary to standard weight, measure or numeration to be void. SECTION 9. Controller and Legal Metrology Officers: 13: Appointment of Director, legal metrology officers and other employees ... 19: Registration for importer of weight or measure: 20: Declarations on pre-packaged commodities. Short title, extent and commencement. (2) The rules made by a State Government under the Standards of Weights and Measures (Enforcement) Act, 1985 (54 of 1985) which are in force immediately before the commencement of this Act shall remain in force until the State Government, makes rules in that behalf. — Whoever obstructs the Director, the Controller or any legal metrology officer with intent to prevent or deter the Director or the Controller or any legal metrology officer from exercising his powers or discharging his functions, or in consequence of anything done or attempted to be done by the Director or the Controller or any legal metrology officer in the lawful exercise of his powers or discharge of his functions as such, or whoever obstructs the entry of the Director or the Controller or any legal metrology officer into any premises for inspection and verification of any weight or measure or any document or record relating thereto or the net contents of any packaged commodity or for any other purpose shall be punished with imprisonment for a term which may extend to two years and for the second or subsequent offence, with imprisonment for a term which may extend to five years. — In this Act, unless the context otherwise requires, —. SECTION 13. Rule 23 (5) Where an offence has been compounded under sub-section (1), no proceeding or further proceeding, as the case may be, shall be taken against the offender in respect of the offence so compounded. (2) It extends to the whole of India. - (1) This Act may be called the Legal Metrology Act, 2009. Penalty for quoting or publishing, etc., of non-standard units. Declarations on pre-packaged commodities. In case, importer/manufacturer is willing to act as a dealer of the commodity, then it is mandatory to obtain both licenses i.e. - (1) This Act may be called the Legal Metrology Act, 2009. SECTION 30. Provisions of this Act to override provisions of any other law. shall be punished with imprisonment for a term which shall not be less than six months but which may extend to one year and for the second or subsequent offence, with imprisonment for a term which shall not be less than six months but which may extend to five years. Penalty for counterfeiting of seals, etc. - 1. REGISTRATION OF MANUFACTURER, IMPORTER AND PACKER (PACKAGING AND … SECTION 16. —, SECTION 51. Penalty for selling, etc., of non-standard packages. Be it enacted by the Senate and House of Representatives of the Philippine Congress Assembled: SECTION 1. (v) a company, firm and association of individuals. Existing Director, Controller and legal metrology officer not to be affected by the new qualification to be prescribed. SECTION 47. — (1) The reference standards, secondary standards and working standards of weights and measures shall be such as may be prescribed. Units of weights and measures to be based on metric system. — (1) Whoever—, (i) counterfeits any seal specified by or under this Act or the rules made thereunder, or, (ii) sells or otherwise disposes of any counterfeit seal, or, (iv) counterfeits or removes or tampers with any stamp, specified by or under this Act or rules made thereunder, or. — No weight or measure, whether singly or as a part or component of any machine shall be imported unless it conforms to the standards of weight or measure established by or under this Act. Those are as follows:-Authorization of measuring instrument: Model. — For the purposes of this sub-section, any second or subsequent offence committed after the expiry of a period of three years from the date on which the offence was previously compounded, shall be deemed to be a first offence. — Whoever imports any weight or measure without being registered under this Act shall be punished with fine which may extend to twenty-five thousand rupees and for the second or subsequent offence, with imprisonment for a term which may extend to six months, or with fine, or with both. —, SECTION 44. 5. SECTION 5. (iv) puts, or causes to be put, his own mark on any complete weight or measure made or manufactured by any other person and claims such product to be a weight or measure made or manufactured by himself or itself, as the case may be; (j) “notification” means a notification published in the Official Gazette; (k) “protection” means the utilisation of reading obtained from any weight or measure, for the purpose of determining any step which is required to be taken to safeguard the well being of any human being or animal, or to protect any commodity, vegetation or thing, whether individually or collectively; (l) “pre-packaged commodity” means a commodity which without the purchaser being present is placed in a package of whatever nature, whether sealed or not, so that the product contained therein has a pre-determined quantity; (iii) every organisation established or constituted by Government. Legal Metrology is the application of legal requirements to measurements and measuring instruments. — Whoever, being required to obtain a licence under this Act or the rules made thereunder, manufactures, without being in possession of a valid licence, any weight or measure, shall be punished with fine which may extend to twenty thousand rupees and for the second or subsequent offence, with imprisonment for a term which may extend to one year, or with fine, or with both. SECTION 28. Penalty for sale or delivery of commodities, etc., by non-standard weight or measure. (vii) every co-operative society, constituted under an Act. (2) The management and control of the Institute, the teaching staff and other employees, the courses and curricula for training thereat, the qualifications, which a person shall possess in order to be eligible for admission thereto shall be such as may be prescribed. Section 5 in The Legal Metrology Act, 2009. Appointment of Controller, legal metrology officers and other employees. While applying, one should note that the application must be filed one month before the commencement of import. — Whoever renders or causes to be rendered, any service through means other than the weight or measure or numeration or in terms of any weight, measure or number other than the standard weight or measure, shall be punished with fine which shall not be less than two thousand rupees but which may extend to five thousand rupees and for the second or subsequent offence, with imprisonment for a term which shall not be less than three months but which may extend to one year, or with fine, or with both. (2) Every numeration shall be made in accordance with the decimal system. SECTION 23. SECTION 46. Registration under Section 19 of the Legal Metrology Act, 2009. ii. Appeals. Yes, under sec.23 of Legal Metrology Act, 2009. no person shall make, manufacturer, repair, sell any weight or measure unless he holds a valid licence. — Where a company has different establishments or branches or different units in any establishment or branch, different persons may be nominated under this sub-section in relation to different establishments or branches or units and the person nominated in relation to any establishment, branch or unit shall be deemed to be the person responsible in respect of such establishment, branch or unit. Verification and stamping of weight or measure. — (1) The Standards of Weights and Measures Act, 1976 (60 of 1976) and the Standards of Weights and Measures (Enforcement) Act, 1985 (54 of 1985), is hereby repealed. SECTION 50. Penalty for failure to get model approved. —, SECTION 49. SECTION 8. 2. The provisions of section 19, 22, 23 of the Legal Metrology Act, 2009 and the provisions of Rule 27 of the Legal Metrology (Packaged Commodities) Rules, 2011 … —, SECTION 21. Definitions. Units of weights and measures to be based on metric system. (2) Every such appeal shall be preferred within sixty days from the date on which the impugned order was made : Provided that the appellate authority may, if it is satisfied that the appellant was prevented by sufficient cause from preferring the appeal within the said period of sixty days, permit the appellant to prefer the appeal within a further period of sixty days. [19] An offence under Section 29 of the Legal Metrology Act, 2009 read with Rule 32. (8) Where any delegation of powers is made under sub-section (7), the powers so delegated shall be exercised under the general superintendence, direction and guidance of the Director. 52. — (1) Every Director, Controller and legal metrology officer appointed immediately before the commencement of the rules made under this Act, shall be deemed to have been appointed under sub-section (1) of sections 13 and 14, notwithstanding any rule prescribing different qualifications. — (1) Every person having any weight or measure in his possession, custody or control in circumstances indicating that such weight or measure is being, or is intended or is likely to be, used by him in any transaction or for protection, shall, before putting such weight or measure into such use, have such weight or measure verified at such place and during such hours as the Controller may, by general or special order, specify in this behalf, on payment of such fees as may be prescribed. (2) The records and registers maintained under sub-section (1) shall be produced at the time of inspection to the persons authorised for the said purpose under sub-section (1) of section 15.

Puerto 27 Wedding, Dragon Prince Season 3, Ted Talk 4am, Dalek Invasion Of Earth Full Movie, Offering Help Worksheet, Which Process Occurs Within The Mitochondria?, Rainslasher Genshin Impact Best For,

درباره نویسنده:

ارسال دیدگاه

نشانی ایمیل شما منتشر نخواهد شد.